Iscar Offers A Revolutionary Line Of Slitting Cutters Applying Tang-Grip Technology And The Strength Of Sumo Tec Grades

Iscar Offers A Revolutionary Line Of Slitting Cutters Applying Tang-Grip Technology And The Strength Of Sumo Tec Grades

Iscar at this time offers a family of high-performance slitting tools that merge the convenience and security of Tang-Grip clamping with the added durability of the new Sumo Tec insert grades.

The conception, already verified effective in Tang-Grip parting tools, has now been spread to slitting cutters. In the patented Tang-Grip clamping system, inserts are press-fit into their pockets accompanied by a distinct hand tool, and are clutched securely in place without the need for clamps, upper jaws or set screws that can weaken the insert and obstruct chip flow. The pocket composition utilizes cutting forces to retain the insert seated tightly in position, preventing any prospect of insert pull-out. The Tang-Grip clamping system also fosters more accurate slitting cuts plus longer pocket and insert life.

Iscar's Sumo Tec insert grades showcase a distinct post-coating treatment which greatly increases tool life and dependability.

Unveiled in late 2007, the new Sumo Tec treatment smooths the insert's coated surface to eliminate microscopic stress raisers, diminish heat and friction and boost chip flow. The result is enhanced toughness and opposition to chipping and built-up edge, all leading to greater tool lifespan. The golden-colored side on Sumo Tec inserts facilitates wear detection. Size for size, Tangslit cutters offer more teeth than Iscar's SGSF cutters, enabling higher feed rates.

Their increased rigidity leads to straighter, better accurate cuts and lower vibration even in large-diameter cutters. The revolutionary Tangslit TGSF cutters come in 100 to 160 mm diameters, 3 and 4 mm widths and can accept the exact same assortment of inserts as Tang-Grip parting tools. Several other sizes will be added.

Available Sumo Tec grades for Tangslit cutters include:
IC808, with a tough submicron substrate beneath a Sumo Tec TiAlN PVD coating, offering exceptional resistance to impact loads and built-up edge. This grade is suggested for slitting heat resistant alloys, austenitic stainless steel, hard alloys & carbon steel.

IC830, supplying increased toughness for heavier parting & grooving including interrupted cuts. It is suitable for all stainless steel and high temperature alloys.

IC908, a hard, fine-grain substrate with superior chipping resistance, mixed with a completely new Sumo Tec TiAlN PVD coating. It is perfect for nodular or grey cast iron.

IC928 and 928A, PVD TiAlN-coated tough grades suited for stainless steel, high temperature alloys and other alloy steels. These grades are additionally recommended for interrupted cuts and heavy operations.

All Tangslit and Tang-Grip inserts are available in J- or C-type chipformer geometries from Iscar.

Iscar Recently Made Public Numerous Original Lines To Enlarge Their Family Of Milling Tools
Iscar recently released a new family of High Speed Milling adjustable endmills and facemills that will improve milling of aluminum, non-metallics, cast iron and hardened steel. This should prove especially useful in the automotive and aerospace industries.

The Most Recent In Carbide Endmill Designs In A Extended And Outstanding Family From Iscar
Manufacturers and die & mold shops can eliminate chatter problems in many milling operations with Iscar's new Chatterfree endmills. The cutters' variable-pitch flute pattern eliminates harmonic vibration, the main source of chatter. This enables faster cutting and finer finish in rough or finish slotting, shoulder milling and cavity milling.

Iscar Adds Their Latest Innovations To A Long Line Of Effective Hole Producing Solutions
Iscar recently released several different drilling innovations to meet their customers needs. These new products are Sumocham Drill, DR-DH and Deep Drills. Drawing off of their experience Iscar has come up with new and innovative ways to increase productivity for the end user.

New Cutters And Carbide Insert Arrangements From Iscar To Better Maximize The Machining Method
Iscar is introducing Penta 34 carbide inserts with a new PB chipformer. The PB chipformer features a single cavity with a positive rake, neutral shoulder angle, and a honed edge. It is actually a C-type chipformer with a different frontal edge.

Push Pull Testing For Construction Industry Supplying Calibrated Gauges. Stress Load Testing Methods For On Site Documentation To Testing Requirements.
Push Pull Testing for the Railway industry for proof of reliable anchor fixings. Calibrated push pull force gauges are used for stress load testing along with tensile strength pull testing procedures. Proof of load testing undertaken, measured, recorded in a reliable and standard way to BS5080 Part 1 standards.

Industrial Water Heater - Considering All Of Your Requirements - Read Cautiously In Order To Know More
Looking into a commercial water heater? Then you have a few things that you must consider. Take a look at these areas to avoid making a mistake with the wrong unit.

Grad Profession At Land Rover And Jaguar.
Even if there is no formal education in medical school, new graduates planning to pursue such graduate careers can undergo training to cover the basics in health care to learn the non-specialized functions of the medical doctor.

Related Articles

Blogroll